Forney has maintained its position as a leader in power plant and large industrial systems for more than 80 years by designing, manufacturing, installing and servicing the most innovative lines of combustion equipment.

Since its inception, Forney's combustion products have been applied to thousands of power and industrial boilers worldwide. Our experience includes firing oil, gas, and process by-products. Forney's combustion products include igniters, flame detectors, duct burners, burner management systems, and speciality applications.

Uniflame II - Unitised Flame Detector with built in Amplifier
A combination of solid state infrared, ultraviolet or dual (IR and UV) sensors are utilised in the Uniflame series flame detectors that are based on microprocessor technology. These can be applied to solid, liquid or combination fuel firing. It also incorporates an adjustable flame relay to eliminate the requirement of a remote signal amplifier.

IDD 9000 Amplifier
Panel Mounted Flame Detector Amplifier provides advanced flame signal analysis and tuning capabilities to meet new challenges of today's market place.

IDD-II Series Flame Detector
Designed to accurately detect & discriminate the luminous flames that fuel oil, coal and lignite fuels create's, the IDD-II Flame Detector is used for light fuel oil flame sensing and is also designed specifically for the low flame frequency produced by high ash flames & lignite.

IDD amplifier
A flame detector amplifier for utility and industrial boilers with output contacts that make it a popular choice for multi burner applications. The Forney IDD series flame detector amplifier is available as a panel or rack mount and is suitable for coal, oil or natural gas being compatible with a variety of gas applications. The detector outputs an analogue signal with a multitude of frequencies when viewing a flame. The amplifier after receiving the signal is able to select one of many discrete frequencies which best represents the "flame on" condition.

DR6101E Dual Range Amplifier
The microprocessor based DR6101E has a two-range design which allows the unit to independently monitor and process inputs from two detectors simultaneously.

Cooling Chamber for IDD Series Detectors
An economical compact method of providing additional cooling for detectors in high temperature applications. The unit consists of a two piece cast steel housing that encloses Forney detectors. The housing is easily opened by hand to allow access to the detector without the need to disconnect any connections. It also protects and supports the detector and its cables from possible damage.

DURAFire® Oil Igniter
The Forney DURAFire® is the only oil igniter on the market to incorporate a highly stable and reliable "protected primary combustion zone". Capacities range from 5 to 35 mmBtu/hr for use in wall burners.

MaxFire® Gas Igniter
The Forney MAXFire® gas igniter provides stable and reliable operation in a size and capacity range from 2" OD, 1 mmBtu/hr to 5" OD 35 mmBtu/hr for use in wall burners.

Flexible Single Tube (FST) Igniter
The FST oil or gas igniter is designed for use in tilting tangential burners as a Class I igniter and warm-up gun.

Q&T Oil Guns
These oil guns provide efficient & optimum oil combustion for both opposed & tangentially fired boilers.

Horn Igniter
As an upgraded replacement for OEM equipment the Forney Horn igniter offers optical flame detection and high energy spark ignition for both oil and natural gas firing. Retrofit is made easy by matching the bolt pattern to the existing windbox opening.

adVantage® Duct Burner
adVantage® duct burners perform in the most challenging conditions. Premium components and patented technology join to perform like no other duct burner. This design works best in advanced Gas Turbine applications, especially those with water or steam injection where low emissions are critical.